Sanus VML5 Manual De Instrucciones página 12

4. Place the wall plate template
template and tape in place.
09
NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com.
IMPORTANT
: Be sure you mark and drill into the center of the stud.
5. Drill the middle two pilot holes (into the stud) using a 5.5 mm (7/32 in.) diameter drill bit.
IMPORTANT
: Pilot holes must be drilled to a depth of 75 mm (3 in.).
Drill the outer top two pilot holes (into the drywall) using a 10 mm (3/8 in.) diameter drill bit.
IMPORTANT
: Pilot holes must be drilled to a depth of 25 mm (1 in.).
4
12
at your desired height and position the middle holes over your stud center lines. Level the wall plate
09
09
5
.)
( 3 / 8 i n
1 0 m m
2 i n . )
m ( 7 / 3
5 . 5 m
2 i n . )
m ( 7 / 3
5 . 5 m
25 mm
(1 in.)
10 mm
(3/8 in.)
8 i n . )
m ( 3 /
1 0 m
09
75 mm
(3 in.)
5.5 mm
(7/32 in.)