Set Water Days Scheduling Option; Set Odd/Even Day Scheduling Option - Signature Control Systems EZ Pro 8600 Serie Manual De Instalación Y Programación

PROGRAMMING INSTRUCTIONS
NOTE: The MODE dial must be in the PROGRAM position to set a schedule.
The LCD will display the currently scheduled program (default is all WATER DAYS.) The
SELECT '+' or '–' keys will scroll the LCD display through each of the scheduling positions
WATER DAYS, ODD, EVEN, INTERVAL, and INTERVAL START DATE. Be sure the
PROGRAM dial is set on the program you want to change (A, B, or C) and that you want to
change the current schedule. A scheduling option is chosen after you press a button, either
SELECT or ADJUST. The old schedule is replaced with the new one. It's easy to program a
schedule with the following procedures.

Set Water Days Scheduling Option

Turn the large dial to the SCHEDULE position. Use the SELECT '+' or '–' till the raindrops
appear above the days of the week. Press the ADJUST '+' button to select that day for
watering or press ADJUST '–' for non-watering days. A flashing indicator appears over the
day you're about to set. Raindrops appear over selected days to water. The indicator
automatically moves one day to the right after an ADJUST '+' or '–' key press. Continue
selecting or deselecting the days you want the controller to water until you have your 7-day
calendar set.
NOTE: Programming a WATER DAYS schedule deletes any other schedule for the
selected program.

Set Odd/Even Day Scheduling Option

Turn the large dial to the SCHEDULE position. The last scheduling option chosen for the
current program appears on the LCD. To set either an ODD or an EVEN schedule press the
SELECT '+' or '–' button till an arrow appears on the LCD next to the appropriate schedule
(ODD or EVEN). A DATE must be set for odd/even watering). The SELECT '+' or '–' buttons
act as toggle keys and will toggle between odd or even.
NOTE: Programming an ODD/EVEN schedule deletes any other schedule for the
selected program.
16