Main Function - AMS PAR 62+ LASER Instrucciones De Usuario

4.2 Main Function

To select any functions, press MENU button until the required one is shown on the display.
Select the function by ENTER button and the display will blink. Use DOWN and UP button to
change the mode. Once the required mode has been selected, press ENTER button to
setup . Back to the functions without any change press MENU button. The main functions
are shown below:
3.Menu
4.Up
5.Down
6.Enter
Digital Display Operation
A001~A511
SLAU
CF01~CF99
CJ01~CJ99
CP01~CP99
CT01~CT99
RGB
DEno
SOUD
L RG
L R
L G
L off
PAR 62+LASER
To select the program functions
To go forward in the selected functions
To go backword in the selected functions
To confirm the selected funtions
8CH DMX Mode ,Jump flash ( Already connect DMX)
Slave Mode
Gradual Change ,(1-99 color change speed from slow to fast)
Jump Change ,(1-99 color change speed from slow to fast)
Pulse Change ,(1-99 color change speed from slow to fast)
Strobe,(1-99 color change speed from slow to fast)
Setting the brightness of LED
Press "ENTER" Button to Save.RGB-->R***-->G***-->B****-->R***
Auto Mode
Sound Mode
RG Laser on
Red laser on
Green laser on
Laser off
2
EN