Front Panel - Numark SING MASTER Guia Del Usuario

Ocultar thumbs Ver también para SING MASTER:
Idiomas disponibles
  • ES

Idiomas disponibles

Features

Front Panel

4
1
2
1.
Microphone Inputs: Connect the included dynamic microphones to these 1/4" (6.35 mm) inputs.
2.
Microphone Volume: Adjust this dial to control the volume for both microphone inputs.
3.
Master Volume: Adjust this dial to control the speaker's main mix volume, which includes the
microphone inputs, Aux input, and the audio from a paired Bluetooth device.
4.
Aux Input: Connect a smartphone, MP3 player, DVD player, computer soundcard, or other line-level
audio source to this 1/8" (3.5 mm) Aux input.
5.
Aux Volume +/-: Press these buttons to control the volume for the Aux input and Bluetooth signal.
Note: The Aux input volume will be adjusted separately from the Bluetooth volume.
6.
Bluetooth: Press this button to pair to a Bluetooth device. Press this button again to unpair from a
connected Bluetooth device.
Note: Volume on your Bluetooth device should be turned up.
7.
Bluetooth Icon: The Bluetooth icon will be lit solid when a device is paired to Sing Master.
8.
Aux/Headphone Output: Connect this 1/8" (3.5 mm) output to headphones, a powered speaker, or a
recorder.
9.
FX Group: Press one of the A-D buttons to select an effect category.
10.
FX Group Icon: The display will show the selected category for the built-in effects.
11.
Voice Effect On/Off: Press this button to activate/deactivate the built-in effects. The built-in effects
are applied to both microphone inputs.
12.
Voice Effect Icon: The display will show the effect preset icon when the built-in effects are activated.
13.
-/+: Use these buttons to select one of the built-in effects.
14.
Light Mode: Press this button to cycle through these different light effects:
Off (no lights)
EQ Bars (reactive to music)
Horizontal Color Wipe (non-reactive to music)
Shimmering Large Blocks (non-reactive to music)
Shimmering Small Blocks (non-reactive to music)
Falling Blocks (non-reactive to music)
Wavy Line (reactive to music)
Pulsating Block (reactive to music)
Light Bar (reactive to music)
Snowflake/Square Lights (non-reactive to music)
Vertical Lights (non-reactive to music)
15.
USB Charge: Connect your device's charge cable here to charge it.
Note: The USB charging port does not play music. Use Bluetooth or the Aux input to play your music
source.
6
7
10
10
9
5
8
12
12
14
14
13
13
11
11
15
15
3
3
loading