Triton ArtNET DMX 1 Manual De Usuario página 11

2. SEARCHING CONFIGURATION
Node configuration page ( Node A/B Settings )-Port configurations, as shown below:
• Node configuration page ( Node A/B Settings )-Port configurations, as shown below:
• Mode : Set the DMX input/output mode.
• Note: input/output mode is read-only, configured will decide by dip switches on the Panel.
• Universe : Set the Art-Net of the UNIVERSE.
• Merge : Set the merge strategy when you have multiple inputs to the same port, you can keep the
default.
• Frame Rate: Set DMX Output refresh rate 。
• Unicast : Set input mode if use the unicast mode to save the bandwidth, need to specify the
corresponding device's IP address.
User Manual | ArtNET-DMX 1 Triton Blue | Rev. June 2018 | www.triton-blue.com
You can instruct the user to configure and activate
the required DMX Networking applications by PC
-End configuration software.
With this feature, users need to spend on average
only 30 seconds to complete set of equipment,
saving a lot of time and effort.
Click on the " search ", the system lists all devices
on the network, double-click to the configuration.
Click on the "Default", Device will restore the
factory settings.
The basic configuration page ( Basic Settings )
Device name DMX Time, display time, IP. Some
basic parameters such as address configuration.
11.