Wiseup WIFI09 Guia Del Usuario página 14

Q4: The camera is not holding my Wifi settings and continues to show that the
camera is offline?
A4: Make sure the camera is inside the range of good WIFI signal. Or if you are using the
backup battery, check if the power adapter is connected properly for long time use.
Q5: Will the camera still work if the power goes out?
A5: If the camera is in P2P (LAN) mode, the camera can still work and record video as
long as the backup battery provides power for the camera to run. If the camera is in WAN
mode, it will not work until power is restored and the Internet access is available.
Q6: How to add the camera to more devices?
A6: Make sure that camera is in WAN mode already. Then launch the "Camwf" APP on your
other Android phone or tablet PC, tap "+" icon, input the camera UID (a unique combination of
numbers and letters specific to your camera). Finally, tap "OK" to add the camera to the APP.
Q7: What to do if I forget my password?
A7: You will have to reset the device to factory settings; press the reset Button twice,
delete the camera in the Camwf APP and re-add it.
Q8: The camera does not record any video to the Micro SD card?
A8: Power off the camera, take out the Micro SD card, format the SD card, then insert it
to the SD card slot again, power on the camera again.
Q9: My PC computer is unable to read the SD card directly from the device.
A9: Remove the SD card from the camera, then use a card reader to read it on your PC.
Make sure the camera is powered off before removing the Micro SD card.
Q10: How many mobile devices can connect to the camera at the same time?
A10: No limit.
Q11: How many cameras are supported on the mobile application?
A11: No limit.