Initial Operation; Spare Parts; Technical Data - Seliger 150 Manual De Instrucciones

INITIAL OPERATION

Put the pump in place in the indoor fountain or aquarium. You can connect the
pump directly or using the included adapters to a fl exible hose or rigid pipe.
(Fig.1)
The required water quantity can be adjusted on the front of the pump. Fill with
enough water to cover the pump completely. Connect the cable to a suitable
mains socket. (Fig. 2)
Fig. 1
Fig. 2
10 ENGLISH
MAINTENANCE
The pump fi lter should be cleaned at regular intervals.
To do this, unplug the device from the mains, remove the front of the pump and
clean it under lukewarm water. (Fig 3)
Fig 3

SPARE PARTS:

Pump (without transformer)
Transformer
Set of 2 adapters
Switch

TECHNICAL DATA:

Pump
Input: 12V /50 Hz
Watt: 1
Transformer
Input: 230V~ /50Hz
Protection: Protected against overheating and overcharge.
Produced: DIN EN 60742
40332
40331
40337
40353
H maximum: 38cm
max l/h: 150
Output: 12V /200mA
ENGLISH 11