Troubleshooting - Speedypress PSP-202E Manual De Instrucciones

TROUBLE SHOOTING
Before taking the unit to a service center, please check the following list of common problems for your issue.
PROBLEM
Unit fails to steam.
Power Indicator Light
does not illuminate.
Unit fails to steam.
Power Indicator
Light does illuminate.
Steam Burst output is
weak or intermittent.
POSSIBLE CAUSE
Unit is not plugged in.
Household Circuit Breaker/
Ground Fault Interrupter has
tripped or blown a fuse.
Auto Shut-Off has engaged.
Water Reservoir is empty.
Unit is damaged or malfunctioning.
Pressing Plate needs to be
cleaned.
SOLUTION
Plug into electrical outlet.
Reset Circuit Breaker/Ground Fault
Interrupter, or replace fuse. If you need
assistance, Contact a licensed electrician.
Refer to Auto Shut-Off section on page 5
of this manual for proper procedure.
Refill Water Reservoir using procedures
on page 6-7 of this manual.
Please contact our customer support
department.
Refer to Cleaning the Digital Fabric
Steam Press section on page 11 of this
manual for proper procedure.
13