Bialetti SLW05 Instructiones De Uso página 38

EN
Problem found
The appliance does not
turn on.
The bowl (3) is locked,
cannot
from the motor unit.
The hopper
jammed.
The motor is blocked.
8. Problems/causes/solutions
Plug not inserted.
The voltage required
for the appliance
does not correspond
to the available mains
voltage.
Possible internal
damage.
The bowl was filled
with too much food
or the inserted sub-
be removed
stance is not suitable
for the features set
forth in this manual.
The hopper was filled
with too much food
(1) is or the inserted sub-
stance is not suitable
for the features set
forth in this manual.
The bowl was filled
with too much food
or the inserted sub-
stance is not suitable
for the features set
forth in this manual.
The safety system
started owing to a
motor overheating.
Possible cause
38
Solution
Check proper inser-
tion of the plug or in-
sert it into a different
power socket.
Check the mains
voltage with the
values required for the
appliance.
Contact the Customer
service Bialetti.
Press the switch (13)
on position "R" for
3-5 seconds twice or
three times.
Press the switch (13)
on position "R" for
3-5 seconds twice or
three times.
Use the presser (2).
Press the switch (13)
on position "R" for
3-5 seconds twice or
three times.
After each use, dis-
connect the plug from
the mains outlet, emp-
ty the hopper and the
bowl and allow the
motor to cool down.