Installation - HAMPTON BAY 25-803-68 Guía De Uso Y Cuidado

Installation

1
Attaching the mounting bracket to
the mantel
□ Attach a mounting bracket to the top edge of the back of
the mantel (A) by inserting two shirt screws through the
mounting bracket and into the pre-drilled holes in the
mantel (A). Tighten with a screwdriver.
3
Attaching the nylon strap
DANGER: This product is only a deterrent. It is not a
substitute for proper adult supervision.
□ Set the mantel (A) 2-3 inches from the wall with both
mounting brackets aligned.
□ Slip the nylon strap through the openings in each of
the mounting brackets and secure the
nylon strap. This will help prevent the
mantel from tipping.
2
Attaching the mounting bracket to
the wall
□ Attach a mounting bracket to the wall in the location you
have selected to put the mantel (A) by positioning the
mounting bracket at approximately the same height as the
mounting bracket previously attached to the mantel (A).
□ Insert screws through the mounting bracket and into a wall
stud. If there is no stud present, insert wall anchors before
inserting the screws. Tighten with a screwdriver.
9
PLEASE CONTACT 855-HD-HAMPTON FOR FURTHER ASSISTANCE.
HAMPTONBAY.COM