AGP G5 Instrucciones De Seguridad página 8

WARNING: Indicates a potentially hazardous situation which if not avoided will result in death or serious
injury.
BEFORE USING THIS TOOL
WARNING: Some dust created by the power sanding, sawing, grinding, drilling and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-bases paints
• Crystalline silica from bricks, cement and other masonry products
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment such as
dust masks specially designed to filter out microscopic particles.
WARNING: To reduce the risk of mistakes that could cause serious or permanent injury, do not plug the
machine in until the following steps have been completed.
• Learn the use and function of the ON-OFF switch.
• Review and understand all Safety
• Instructions and Operating Procedures in this manual.
• Review the maintenance methods for this tool.
REDUCE THE RISK OF DANGEROUS ENVIRONMENT
• Use the machine in a dry or indoor place protected from rain.
• Place the machine so that neither the user nor bystanders are forced to stand in line with Machine.
Thrown debris could injure people in its path.
BEFORE EACH USE INSPECT YOUR MACHINE
• Disconnect the Power Scouring Machine from its power source to reduce the risk of injury from
accidentally starting, before changing any setup.
• Check for proper alignment of moving parts.
• Check for damaged electric cords.
• Check for binding of moving parts.
• Check for broken parts.
• Ensure work piece is stable
• Check for other conditions that may affect the way the machine works.
Maintain Tools With Care. Keep the machine clean for best and safest performance. Follow instructions for
lubricating.
GB
8