Minimum System Requirements - Saitek P1500 Manual De Instrucciones

Introduction
Congratulations on your purchase of the Saitek P1500 Rumble Pad. The P1500 is the
latest addition to the Saitek range of quality high-tech gamepads for the PC - delivering
the gamer the latest in Rumble technology. The superbly styled P1500 will immerse you
totally in the game – now you will feel every bump in the road in high-octane racing or
blows from your nemesis in first-person gaming.
Features:
• State-of-the-Art Rumble feedback
• Analog and digital Modes
• Analog joystick
• Fully programmable for advanced users with SGE
• 4 triggers and 4 buttons
• Fast and responsive 8-way D-Pad
• Pad auto-configures for the game

Minimum System Requirements

Minimum system requirements for this device are a 166MHz Pentium-class computer with
32MB RAM and Microsoft Windows® 98 or Millennium Edition.
Microsoft Internet Explorer® 4.x or above and DirectX® 7.0a or above are needed to run
the Saitek Gaming Extensions software. These are available on the Saitek Product
Companion Disk that accompanies this product.
GETTING STARTED
Connecting the P1500 to your PC
Your P1500 connects to your computer by means of a USB (Universal Serial Bus)
connector. USB delivers many benefits - including ease of use and faster and more
accurate report rates for improved control.
Note: Please do not connect your P1500 until asked to by the installation procedure.
Installing the P1500
This installation will install the drivers for the Saitek P1500 and the Saitek Gaming
Extensions (SGE) programming software.
Note: Please do not connect your P1500 until asked to by the installation procedure.
1. With your computer switched on, close down any programs that are currently running
and insert the Saitek Product Companion CD into your CD-ROM drive.
2. When the first screen appears, click Install to continue.
3. After reading over the Disclaimer, click Accept to continue.
Note: For your P1500 to work, you must have a minimum of Microsoft® Internet Explorer
4 and DirectX® 7.0a on your computer. The installer will automatically recognize if these
programs need to be added, and will allow you to install them directly from the Saitek
Product Companion CD, if necessary.
If you are prompted to install either Microsoft® Internet Explorer 4 or DirectX® 7.0a (or
both), click Install in each case, follow the on-screen instructions, and then restart your
computer. Make sure that you leave the Saitek CD in the drive when restarting. After
this software has been installed, you will automatically be taken to the installation to
continue with the next step.
4. At the next screen, click on the Install button and follow the on-screen instructions.
Note: The computer will restart during this process - please leave the Saitek CD in
the CD-ROM drive when this happens.
5. After the computer has restarted, and when the connection prompt appears, plug the
P1500 into your PC. Your computer will recognize the P1500 and start installing the
software. Follow the on-screen instructions until the installation is complete.
Note: If you connected the P1500 to the computer before installing the software, the
installation will stop at this point. To rectify this, remove and then reconnect the
controller and the installation will continue as normal.
6. When prompted, click Test to view the Test Screen. Now try out your P1500 's
buttons and controls to show that it is working properly. When you have finished,
click OK.
7. Finally, click Yes to optimize the Saitek P1500 for your existing games with the
Game Profiler Wizard.
3