Marq COLORMAX P18 Guia Del Usuario página 4

Features
Rear Panel
1. Power Cable: Connect this cable to a power outlet.
2. DMX In: Use a standard 3-pin DMX cable to connect this input (A) to your DMX controller or (B)
to another fixture that will pass DMX data through it to this one. Colormax P18 receives DMX
data over this connection. Please see
multiple fixtures.
3. DMX Out: Use a standard 3-pin DMX cable to connect this output to an additional fixture.
Colormax P18 sends its data to an additional fixture over this connection. Please see
Linking > DMX
4. Display: This display shows messages and values indicating the fixture's current status.
5. Menu: Press this button to access Colormax P18's menu.
6. Up/: Press this button to select the next-highest menu option or to increase the value by 1.
7. Down/: Press this button to select the next-lowest menu option or to decrease the value by 1.
8. Enter: Press this to confirm your current selection or value.
4
1
2
3
for information about linking multiple fixtures.
4
5
6
Setup > Linking > DMX
8
7
for information about linking
Setup >