Vollrath Affordable Portable Manual Para Operadores página 3

CLEANING
WARNING
Electrical Shock Hazard
Do not spray water or cleaning products. Liquid could contact
the electrical components and cause a short circuit or an
electrical shock.
To maintain the appearance and increase the service life, clean your
equipment daily.
NOTICE: Do not use caustic cleaning chemicals, steel wool or
commercial lime removal products to clean the equipment.
Thoroughly rinse equipment with water after cleaning.
1. Turn the power switch to the OFF position.
2. Unplug the equipment.
3. Rotate the drain valve(s) to the open position. Drain the water.
4. Use a damp cloth or sponge dipped in soapy water to clean the
inside of the well and the outside of the equipment.
5. Thoroughly rinse equipment with clean water after cleaning.
6. Rotate the valve to the closed position.
Affordable Portable ™ Non-Refrigerated Cold Food Station Operator's Manual
Clean The Breath Guard
Always use a clean soft lint free cloth or microfiber cloth.
Clean with a neutral cleaner such as a solution of warm water and a
small amount of dish detergent or products specifically made for
cleaning Plexiglas® and acrylic plastic.
Recommended cleaners for Plexiglas® and acrylic include:
• Novus® #1
• Plexi-Clear
• Brillianize®
What Not To Do
• Do not use cleaners containing ammonia, alcohol, acetone or dry
cleaning products. Cleaners with these chemicals will damage
Plexiglas®, acrylic and other plastics.
• Do not use paper towels, abrasive materials, scratching cleansers,
razor blades, brushes, steel wool or scouring pads, such as Scotch
Brite™ pads.
• Do not use WD-40® or petroleum, industrial or commercial cleaning
products.
Removing Minor Scratches
Fine scratches can be removed with a specialized mild abrasive polish
such as Novus #2, or Novus #3. Heavier scratches may require sanding
and buffing. Hand sand with series of sandpapers with increasingly
finer grits (250,400,600). Then use a buffing wheel and buffing
compound.
3