Camera Overview - AKASO TC04 Manual Del Usuario

Camera Overview

LED infrared Light
Indicator
Lens
PIR Motion Sensor
Display Screen
Hole for Locking
Micro SD Slot
AV Jack
Locking Bracket
Locking Bracket
Operating Buttons
Speaker
Mode Switch
(ON/SETUP/OFF)
Micro USB
3
Battery Compartment
6V DC Connection
• The LCD screen only lights on in the SETUP mode, or when changing menu settings or
viewing existing photos in ON mode.
• Using the operating buttons, menu settings can be changed in the test mode or existing
photos can be played back.
• An Micro SD memory card (not included) must have been inserted into the memory card slot
in order to save photos and videos.
• To download photos and videos, connect the camera to a computer via the mini USB cable.
• There are 3 modes, which could be switched by the mode button.
• 8 x LR6 (AA) batteries( not included) are needed to power the camera.
• An external power supply can be provided via the DC connection (input 6 V, at least 1.5 A.
Mains adaptor is not included.)
Steps to use the camera
1. Open and close the camera
To open the camera, undo the two lateral locking brackets as shown in Fig. 1.
To lock the camera again, engage metal hoops of locking brackets into mount and press down
plastic tab of bracket (Fig. 2).
Locking Bracket
Locking Hole
for Lock
Locking Bracket
4