Exhaust Filter - Kenmore 116.23312 Manual Del Propietário

WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged
exhaust filter or without the exhaust
filter or exhaust filter cover installed.
EXHAUST FILTER
HEPA
The exhaust filter cartridge must be
replaced when dirty. Replace the filter when
the entire surface area is covered evenly.
The filter CANNOT be washed as it will
lose its dust trapping ability.
Replacement exhaust filters are available
through Sears Service Center under part
no. 86880. See "Requesting Assistance
or Service"
1. Pull out and up
on the
cover to remove
from the motor
cover and lay aside.
3. Place the new
filter into the motor
cover with the
grey edge down.
Tab
"_ slot
2. When the
exhaust filter
becomes dirty,
remove it by
pulling straight up.
Exhaust
Filter
4. Reinstall the
exhaust filter
cover by insert-
ing the tab into
the slot in the
motor cover.
Press firmly to
snap exhaust fil-
ter cover into
place.
Always follow all safety precautions when
cleaning and servicing the Power-Mate® .
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
14