Terrano -X Manual De Usuario página 14

BLUETOOTH DEVICES: MOBILE PHONES AND MUSIC PLAYERS
PAIRING A BLUETOOTH ENABLED DEVICE
1. Make sure your phone or music player is ON and its Bluetooth mode is activated.
2. With your Terrano-X in Standby mode, press
flash RED. Continue to hold the button until the
3. Search for Bluetooth devices on your phone or MP3 player. After a few seconds the "TERRANO-X" will
appear as a discovered device. Select it. If prompted for a PIN or Passkey, enter 0000 (four zeros).
4. Your phone or music player will confirm that pairing has succeeded and the LED on the TERRANO-X will
begin flashing slowly in
• If Pairing is not completed within 2 minutes, the TERRANO-X will return to Standby mode.
• Not all Bluetooth mobile phones can broadcast Bluetooth stereo music (A2DP), even if the phone has an MP3 player
function. Consult your mobile phone's User Manual for more information.
• After pairing, you may need to tap
USING YOUR MOBILE PHONE
Answer a call
Reject a call
End a call
Voice Dial*
(if supported by phone)
Redial*
Reconnect
INTERCOM CONFERENCE MODE
Add or Remove Rider "A" or "B" to/from a phone call
*This feature is not available during intercom or mobile calls
LISTENING TO MUSIC
Control available from most smartphones and music players - Bluetooth stereo (A2DP) and remote control
feature (AVRCP)
Play
Press
Pause/Stop
Press
*With some phones you may need to repeat this action
14 |
.
BLUE
to connect the TERRANO-X to the phone.
Tap or speak any word loudly into the microphone
Remain silent for 15 seconds, or press
Tap
Tap and follow the prompt from the Mobile
Tap twice
Tap
Tap or while on a phone call
for 2 seconds
for 2 seconds
for at least 6 seconds. The TERRANO-X will first
RED and lights begin rapidly alternating.
BLUE
for 2 seconds
Next track
Press
Previous track*
Press
for 2 seconds
for 2 seconds