Masterbuilt ButterBall MB23010618 Manual De Operación E Instrucciones De Seguridad página 4

2
1
Masterbuilt recommends
cleaning unit prior to use.
To remove lid push tabs together on
outer shell, and pull lid up. Continue
with assembly steps.
3
4
Step 3
Place basket (3) inside inner pot (4).
CALIFORNIA PROPOSITION 65
This product contains chemicals known to the State of California to cause cancer, birth defects or
other reproductive harm.
3
ASSEMBLY INSTRUCTIONS
1
Tabs
Step 1
Insert inner pot (4) into outer shell (1).
Insert inner pot at an angle to fit valve
into side opening of outer shell.
4
Mounting
Bracket
Step 4
Insert breakaway power cord (10) into
connection on control panel (7). Make sure
"This Side Up" is shown on top for proper
connection.
WARNING
Safety Switch
7
1
Step 2
Slide control panel and element (7)
down onto mounting bracket (shown in
Step 1) on side of outer shell (1).
Note: The control panel is correctly attached
when the heating element is positioned inside
the inner pot. Control panel must be correctly
attached for appliance to operate.
A built in safety switch on control panel will
prevent element from heating if not mounted
properly.
7
10