Technical Data - Hozelock Pico Power Manual De Instrucciones

Problem
Causes
Possible
Appliance
not used
for a long
period of
time.
Problems
with TSS
device.
Motor fails No
to start. electrical
power.
Problem
with TSS
device.
Water Seals worn.
leakage.
Appliance Water too
noisy. hot.
Oil leakage. Seals worn.
Motor Nozzle
starts even clogged.
with gun
High
trigger is
pressure
released.
system
or pump
hydraulic
circuit not
Watertight.
No water Nozzle
delivery clogged.
when gun
trigger is
depressed
(with
supply hose
connected).
If the motor starts and does not restart during
operation, wait 2-3 minutes before repeating the start-
up procedure (overload cut-out has been tripped).
If the problem recurs more than once, call your
Hozelock Consumer Services / Authorised Service
Agent.
10
Remedy
Contact Hozelock
Consumer Services /
Service Agent.
Contact Hozelock
Consumer Services /
Service Agent.
Check that the plug is
firmly in the socket and
that the mains voltage
supply is present.
Contact Hozelock
Consumer Services /
Service Agent.
Contact Hozelock
Consumer Services /
Service Agent.
Reduce temperature (see

technical data).

Contact Hozelock
Consumer Services /
Service Agent.
Clean nozzle (fig 26).
Contact Hozelock
Consumer Services /
Service Agent.
Clean nozzle (fig 26).
Technical Data*
Technical Data
Output
Maximum Output
Pressure
Maximum Pressure
Power
Tº input (max.)
Maximum input pressure
Recoil force of the gun at
maximum pressure
Motor Insulation
Motor Protection
Voltage
Sound Level: **(K = 3dB(A))
LPA (EN 60704-1)
LWA (EN 60704-1)
Unit Vibrations ***(K = 1.5m/s²)
Net Weight
Weight (Packed)
* Subject to technical modifications
** The sound intensity level for the operator may
exceed 78.5dB and ear protection measures are
necessary.
*** The declared vibration value has been measured
in accordance with a standard test method and
may be used for comparing one tool with another. The declared vibration value may also be used in a
preliminary assessment of exposure.
WARNING! The vibration emission value during
actual use of the tool can differ from the declared
value depending on the ways in which the tool is used.
Identify safety measures to protect the operator that
are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
Unit 7920
L/min 5.5
L/Min 7.3
MPa 9.5
MPa 14
Kw 1.7
ºC 50
MPa 1
N 12.6
- Class F
- IPX5
V/Hz 220 -
240/50
dB (A) 78.5
dB (A) 93.0
m/s2 < 2,5
kg 7.2
kg 9.1