Radio Operation; Switching To Radio Mode; Selecting The Frequency Band; Selecting Station - Insignia IN-MP101 Guia Del Usuario

OPERATION

RADIO OPERATION

• SWITCHING TO RADIO MODE

Press MOD button (6) shortly to
select radio mode, the radio mode
appears in the display together with
the memory band and frequency.
• SELECTING THE FREQUENCY
BAND
At radio mode, press BND/LOU/ENT
button (13) shortly to select the desired
band.
The reception band will change in the
following order:
FM1 FM2

• SELECTING STATION

Press TUN/TRK
TUN/TRK
activate automatic seek function. Press
for several seconds until "MANUAL"
appears on the display, the manual
tuning mode is selected. If both
buttons have not been pressed for
several seconds, they will return to
seek tuning mode and "AUTO"
appears on the display.

• LOCAL/DISTANT

Press LOC button (2) to select between
local and distant stations. Local setting
for reception of strong station, and a
distant setting for reception of weaker
stations. This function is effect during
AUTO SEEK operation.
• AUTOMATIC MEMORY
STORING & PROGRAM SCANNING
- Automatic Memory Storing
Press AS/PS button (18) for several
seconds, the radio searches from the
current frequency and checks the
signal strength until one cycle search
is finished. And then 6
strongest stations are stored into the
corresponding preset number button.
- Program Scanning
Press AS/PS button (18) shortly to
scan preset station. When the field
strength level is more than the
threshold level of stop level, the radio
is holding at that preset number for
several seconds with releasing mute,
then searches again.

• STATION STORING

Press any one of the preset buttons
(14) (1 to 6) to select a station which
had been stored in the memory.
Press this button for several seconds
FM3 AM
button (17) or
button (16) shortly to
(until 2ND beeps come out), current
station is stored into the number
button.

• MONO/STEREO

Press MON button (2) to select mono
or stereo mode. You can sometimes
improve reception of distant stations
by selecting mono operation.
• SCAN
Press SCN button (19) to set the
function to scan mode, which scanning
to higher frequency station with
receivable signal and keep on each
station for several seconds.

CD OPERATION

• SWITCHING TO CD MODE

If there is no CD inserted in the driver:
Gently insert the CD with the printed
side uppermost into the CD
compartment until you feel some
resistance. The CD is drawn into the
driver automatically. CD playback
begins.
If a CD is already inserted in the driver:
Keep pressing MOD button (6) shortly
until the CD mode display appears.

• SELECTING TRACKS

Press TUN/TRK
TUN/TRK
the previous track or the following track.
Track number shows on display.
Hold TUN/TRK
TUN/TRK
reverse or fast forward. CD play starts
from when you release the button.

• PAUSING PLAYING

Press PAU button (20) to pause CD
player. Press it again to resume play.

• PREVIEWING ALL TRACKS

Press SCN button (21) to play first
several seconds of each track on the
current disc. Press again to stop intro
and listen to track.

• REPEATING THE SAME TRACK

Press RPT button (22) to continuously
repeat the same track. Press it again
to stop repeat.

• PLAYING ALL TRACKS IN RANDOM

Press SHF button (23) to play all tracks
on CD in random order. Press again to
cancel the function.

• EJECTING A DISC

Press button (4) to stop CD playing
and eject rhe disc from the disc slot (5).
10
button (16) or
button (17) to move to
button (16) or
button (17) to fast