Tabla de contenido
Idiomas disponibles
Idiomas disponibles
External speaker PNI DE50 for CB radios
Technical specifications
•
Impedance: 8 Ohm
•
Maximum power: 5 W
•
Connector 3.5 mm
•
Housing material: ABS / metal
•
Cable length: 190 cm
•
Frequency range: 300-8500Hz
•
Dimensions: 130x66x56 mm
•
Working temperature: -26°C ~ +60°C
Instructions for use
•
Install the external speaker using the included metal bracket.
•
Using the side screws, tilt the speaker to the desired position.
•
Connect the 3.5mm jack of the external speaker to the EXT. SP port of
CB radio.
•
After connecting the external speaker, the internal speaker of the CB
radio will be turned off automatically, and the sound will be output through
the external speaker.
Safety warnings
•
Do not hold the external speaker in direct sunlight.
•
Do not run the external speaker cord through areas that could damage
the insulation or even break the wires.
•
Do not position the external speaker close to the air conditioning outlet.
•
Do not position the external speaker close to the airbags.
User manual
2
Tabla de contenido
