Battery-only installation
Installing the energiser outside
Warning! Before installing the energiser, ensure
the energiser is switched off.
Select a suitable site for the energiser.
1
Ensure that the energiser is protected from
animals and the environment. If necessary, house
the energiser in a protective box. Consider site
access, proximity to a suitable area for earthing
and whether the energiser is safe from human
interference. Try to position the energiser as near
as possible to the centre of the electric fence. To
avoid possible damage to the energiser, ensure
that the battery is at least 1 m (3') away from
and not directly below the energiser.
Mount the energiser on a post. Use the template
2
printed inside the back cover of this manual.
Connect the energiser fence Earth terminal
3
(green) to the earthing system.
Connect the energiser Fence output terminal
4
(red) to the fence.
Attach the red (+) energiser clip to the positive
5
terminal of the battery, and the black (–) clip to
its negative terminal. For permanent installations,
use wire to connect the energiser to the battery.
2
Installing the energiser inside
Warning! Before installing the energiser, ensure
the energiser is switched off.
Select a suitable place for the energiser.
1
Ensure that the energiser and battery are out of
reach of children. The battery must be level. To
avoid possible damage to the energiser, ensure
that the battery is at least 1 m (3') away from
and not directly below the energiser.
Mount the energiser on a wall. Use the template
2
printed inside the back cover of this manual.
Connect the energiser fence Earth terminal
3
(green) to the earthing system.
Connect the energiser Fence output terminal
4
(red) to the fence.
Attach the red (+) energiser clip to the positive
5
terminal of the battery, and the black (–) clip to
its negative terminal. For permanent installations,
use wire to connect the energiser to the battery.
Solar installation
Solar panel selection, assembly and positioning
Refer to the "Stafix Solar Selection Guide" for
information about selecting components, assembling
and positioning a solar energiser system.