Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2.16.2 Installing Windows
2.16.2 Installing Windows
2.16.2 Installing Windows
2.16.2 Installing Windows
2.16.2 Installing Windows
RAID F
RAID F
RAID F
RAID F
RAID Functions
unctions
unctions
unctions
unctions
If you want to install Windows
composed of 2 or more SATA / SATAII HDDs with RAID functions, please follow below
steps.
STEP 1: Set up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID installation
guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows
®
Insert the Windows
Vista
to boot your system, and follow the instruction to install Windows
Windows
®
Vista
TM
64-bit OS on your system. When you see "Where do you want to
install Windows?" page, please insert the ASRock Support CD into your optical drive,
and click the "Load Driver" button on the left on the bottom to load the ATI
TM
ATI
RAID drivers are in the following path in our Support CD:
.. \ I386 (For Windows
.. \ AMD64 (For Windows
After that, please insert Windows
the optical drive again to continue the installation.
NOTE1. If you install Windows
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then, please
set the RAID configuration by using the Windows RAID installation guide in the
following path in the Support CD:
.. \ RAID Installation Guide
NOTE2. Currently, if you install Windows
and there are no SATA / SATAII device used, please set up "SATA Operation Mode"
to [non-RAID] in BIOS.
2 . 1 7
2 . 1 7
2 . 1 7 Installing Windows
2 . 1 7
2 . 1 7
Installing Windows
Installing Windows
Installing Windows
Installing Windows
Vista
Vista
Vista
64-bit W
64-bit W
64-bit Without RAID F
Vista
Vista
TM
TM
64-bit W
64-bit W
TM
TM
TM
If you want to install Windows
Vista
TM
or Windows
®
Vista
without RAID functions, please follow below procedures according to the OS you install.
3 4
3 4
3 4
3 4
3 4
ASRock ALiveXFire-eSATA2 Motherboard
Vista
Vista
Vista
Vista
Vista
TM
TM
TM
TM
TM
®
®
TM
Vista
or Windows
Advanced screen
®
TM
TM
Vista
/ Vista
64-bit OS on your system.
TM
®
TM
/ Windows
Vista
64-bit optical disk into the optical drive
®
Vista
TM
OS)
®
Vista
TM
64-bit OS)
®
TM
Vista
/ Windows
®
TM
®
Vista
/ Windows
Vista
®
Vista
TM
/ Windows
2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista
®
ithout RAID F
ithout RAID Functions
ithout RAID F
ithout RAID F
®
2000, Windows
®
XP, Windows
TM
64-bit OS on your SATA / SATAII HDDs and eSATAII devices
/ Vista
/ Vista
/ Vista
64-bit With
64-bit With
64-bit With
/ Vista
/ Vista
64-bit With
64-bit With
TM
TM
TM
TM
TM
®
TM
Vista
64-bit on a RAID disk
IDE Configuration.
®
Vista
TM
/
TM
RAID drivers.
®
TM
Vista
64-bit optical disk into
TM
64-bit on IDE HDDs and want to
®
Vista
TM
64-bit on IDE HDDs
unctions
unctions
unctions
unctions
®
XP 64-bit, Windows
/ / / / /
TM
TM
TM
TM
TM
®
Tabla de contenido
