Registration - GE 27956 Guia Del Usuario

5. Press the menu button to save the year setting and proceed to date setting.
6. The screen displays Date 01/01. Use the touch-tone pad to enter two digits for
current month and day respectively.
7. Press the menu button to save the month/date setting and proceed to time
setting.
8. The screen displays Time 12:01p. Use the touch-tone pad to enter four digits for
current time and use the cid/vol (3or4)button to toggle between "p" (pm) and
"a" (am).
9. Press the menu button to save the setting. The screen displays Saved.
NOTE: If you subscribe to Caller ID service, the current date/time is
set automatically when you receive your first CID record and will
override manually set date/time.

Registration

NOTE: The following procedures can ONLY be done with 27956 or
27911 Accessory Handsets.
A cordless handset will not operate until it is registered to the base. During the
registration process, keep the handset near the base. Up to 4 cordless handsets can
be registered to one base.
NOTE: If a handset is not registered the screen displays Not
Register and if the TALK button on the handset is pressed, the
screen displays Unavailable.
1. Make sure your phone is OFF (not in talk mode).
. On the handset; press the menu button to go to the main menu and use the
cid/vol (3or4) button to scroll to Registration.
. Press the menu button to confirm and use the cid/vol (3or4) button to scroll to
Register.
4. Press the menu button, the screen displays Press and hold page key for 5s.
5. Press and hold the page button on base for 5 seconds , the base screen displays
Registration Mode.
6. If the registration is successful, the handset screen displays Successful and emits
a confirmation tone.
7. If the registration fails (i.e. timeout), the handset screen displays No base and
emits an error tone.
7