Leuze electronic MSI-SR-CM43 Serie Manual Del Usaurio página 6

Technical data
Control circuit
Rated voltage U MSI-SR-CM43
N
Rated voltage U MSI-SR-CM43DT03
N
Rated power
Residual ripple DC
Rated frequency AC
Rated current / peak current
Operate time t MSI-SR-CM43
A2
Release time t MSI-SR-CM43
R2
Operate time t MSI-SR-CM43DT03
A1
Release time t MSI-SR-CM43DT03
R1
Tolerance of the release time t
Minimum switch-on duration t
M
Check-back current path Y1/Y2
Rated switching voltage U
n
Max. continuous current I
n
Contact material
Output circuits
Enabling current paths
Rated switching voltage U
n
Max. continuous current I / max. total current
n
Utilization category according to
EN 60947-5-1
Conditional short circuit current
Mechanical service life
Contact material
Signalling current paths
Rated switching voltage U
n
Max. continuous current I
n
Contact material
General data
Clearance/creepage distance between circuits
Overvoltage category
Rated impulse withstand level
Rated voltage
Contamination level of device: inside / outside
Climatic application class
Protection class to EN 60529 housing / terminals
Ambient / storage temperature
Weight
Terminals and connection
Single-core or finely stranded
Finely stranded with wire-end ferrule
AWG conductor size (only use Cu wires)
Max. tightening torque
Stripping length
Leuze electronic GmbH + Co. KG
[email protected] • www.leuze.com
DC
AC
R1
MSI-SR-CM43DT03
In der Braike 1 D-73277 Owen
min.
AC/DC 20.4 V
DC 20.4 V
50 Hz
4 NO contacts, positively driven
screw-type terminals
1 × 0.2 - 2.5 mm² / 2 × 0.2 - 1.0 mm²
1 × 0.25 - 2.5 mm² / 2 × 0.25 - 1.0 mm²
26 - 14
0.5 - 0.6 Nm (5 - 7 lbf-in)
Tel. +49 (0) 7021 573-0
typ.
AC/DC 24 V
DC 24 V
1.5 W
2 W / 3.3 VA
65 mA / 1000 mA
40 ms
40 ms
200 ms
0.2 s / 0.5 s / 1 s / 2 s / 3 s
± 35 % (0.2 s: + 20%)
0.15 × t
R1
1 NC, positively driven
DC 24 V
0.1 A
Ag-alloy, gold-plated
AC 230 V
6 A / 12 A
AC-15: Ue AC 230 V, Ie 5 A
DC-13: Ue DC 24 V, Ie 5 A
1000 A
7
10 switching operations
Ag-alloy, gold-plated
2 NC, positively driven
AC 230
2 A
Ag-alloy, gold-plated
EN 60664-1
III
4 kV
AC 300 V
2 / 3
H V G to DIN 40040
IP 40 / IP 20
-25...+55 / -25...+75 °C
0.2 kg
spring-type terminals
2 × 0.2 - 1.5 mm²
2 × 0.25 - 1.5 mm²
7 mm
We reserve the right to make changes
09/2016 - 50134628 - 6/17
max.
AC/DC 26.4 V
DC 26.4 V
2.4 V
SS
60 Hz
80 mA / 1800 mA
24 - 16
-