Lacme TRANSTEL GSM 300 Instrucciones De Empleo página 5

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Les Pelouses -
Route du Lude
F-72200 LA FLÈCHE - FRANCE
Tél. : +33 (0)2 43 94 13 45
Fax : +33 (0)2 43 45 24 25
www.lacme.com
The use of TRANSTEL GSM 300 requires buying a SIM card.
Congratulations, you have just purchased a Lacmé GSM transmitter. This professional tool allows you to communicate easily with your
Lacmé energizer. It will greatly facilitate the remote monitoring and maintenance of your electric fences.
1. Two principles functions :
Control remotely the On/ Off
Transmit the alarm
(This function is only compatible with the
Photo diagram 1 :
2. Quick On/Off installation:
2.1 Connection:
- Insert your SIM card in the location indicated in photo 3:
The TRANSTEL GSM 300 requires the purchase of a SIM card.
(Refer to paragraph 7 about the SIM card).
- In case the PIN code is activated, the GSM led blinks. See the error indications chapter (6.)
- Connect the TRANSTEL GSM 300 to your main power supply.
- The 3 LEDs flash for a moment, then the self-testing starts for 10 seconds.
- This causes the red led, indicating the on/off supply (power), to light up
- The GSM indicator then flashes green rapidly while searching for the network. Once the network is captured, the led flashes for a short time
every 2 seconds.
2.2 Basic orders:
2.2.1
Switch on your energizer from a distance :
Send to your SIM card phone number the following text message: :
If there is a mobile phone relay for your SIM card it will receive the following text message :
In order to configure the mobile phone relay SIM card of your TRANSTEL GSM 300 or so as to get more information concerning the
choice of a mobile phone relay, read section 3.2.1
2.2.2
Switch off your energizer from a distance:
Send to your SIM card phone number the following message:
If there is a mobile phone relay for your SIM card it will receive the following text message :
3. Quick start-up Alarm function :
Only for the Lacmé
SECUR 2600-DAC and CLOVERT S60-DAC
energizer's alarm is has activated.
3.1 Connect the alarm cable between the transfer rod of the energizer and the TRANSTEL GSM 300 (jack 1).
TRANSTEL GSM 300
of your energizer via mobile phone by sending SMS messages.
caused by your energizer on your mobile phone.
SECUR 2600-DAC and CLOVERT S60-DAC
230V main
male plug
Energizer
connection rod
Indicator control lights
TURNON1
TURNEDON
TURNOFF1
TURNEDOFF
USER GUIDE
Photo diagram 2 :
Photo diagram 3 :
energizers. You can receive an alert message indicating that the
5
energizers).
SIM card's location
Jack 1 output for connecting
the alarm cable
Insert
Tabla de contenido
loading

Tabla de contenido