Troubleshooting - MTD Yard Machines 31A-020-900 Manual Del Operador

UNIT WILL NOT START
C A U S E
Unit is unplugged
Trigger lock button or trigger were improperly actuated
Overload protection switch has popped out
MOTOR IS ON, BUT ROTOR WILL NOT TURN
C A U S E
Belt is damaged
UNIT LEAVES A THIN LAYER OF SNOW ON PLOWED SURFACES
C A U S E
Scraper is worn
If further assistance is required, contact your authorized service dealer
Motor type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A. C. 120 Volts Electric
Amperage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.5 Amps
clearing Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12.5" (318mm)
Intake Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6" (152mm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 lbs

TROUBLESHOOTING

Check cord to make sure it is plugged into an electrical
outlet
Press in trigger lock button, hold it, and press in trigger
Push it in and follow the starting instructions
Replace the belt, according to inspecting/Replacing the
driver belt
Replace the scraper
SPECIFICATIONS
12
A C T I O N
A C T I O N
A C T I O N