Overhead Rigging - JB Systems Lounge Laser DMX Manual De Instrucciones

ENGLISH
6. CONTROL PANEL: Used to control the different functions of the laser, see further to learn how to
operate the unit.
7. HANGING BRACKET: with 2 knobs on the sides to fasten the unit and a mounting hole to fix a
mounting hook.
8. SAFETY EYE: used to attach a safety cable when the unit is rigged (see paragraph "overhead rigging")
9. LASER APERTURE: Here the laser beam leaves the enclosure; make sure to NEVER look inside the
unit through this opening while the laser effect is switched on!
10. LED LENS: Here the LED-effect leaves the enclosure.
11. WARNING LABEL: "Laser Radiation. Avoid exposure to beam. Class 3B laser product"
12. LASER WARNING SIGN: warns against a potentially dangerous laser when not used by skilled
operators.

OVERHEAD RIGGING

 Important: The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials
should be used, the installed device should be inspected regularly for safety.
 Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
 Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The
fixture must be fixed at least 50cm from surrounding walls.
 The device should be installed out of reach of people and outside areas where persons may walk by or be
seated.
 Before rigging make sure that the installation area can hold a minimum point load of 10times the device's
weight.
 Always use a certified safety cable that can hold 12times the weight of the device when installing the unit.
This secondary safety attachment should be installed in a way that no part of the installation can drop
more than 20cm if the main attachment fails.
 The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!
 Don't cover any ventilation openings as this may result in overheating.
 The operator has to make sure that the safety-relating and machine-technical installations are approved by
an expert before using them for the first time. The installations should be inspected every year by a skilled
person to be sure that safety is still optimal.
CAUTION EYEDAMAGE: Always position the laser in a way that prevents the audience
from looking directly into the laser beams. The installation should assure that the beam
will not strike the audience.
JB SYSTEMS
®
4/48
OPERATION MANUAL
LOUNGE LASER DMX