Block Diagram - Kathrein UFO 351 Manual De Instrucciones

Tuning instructions
Note :
UFO 351 and UFO 352 can be operated with software version 7.20 or higher.
Setting of TV channel unit is effected via the control unit of the base modules.
Example :
Main menu
Setting of input and output channel, output level
and operation mode
For information on key allocation for parameter
selection and change of value, see instructions for
use of UFO ® compact base or extension modules
Input
Input frequency can be set (see technical data) in
channel grid 7 MHz and 8 MHz (UFO 352).
The VHF range of the channel unit UFO 351 has
an integrated 7 MHz channel grid.
Input frequency can be set in the submenu in 125 kHz
steps (TV-AM) or 166 kHz steps (DVB-T).
Output
Output frequency (see technical data) can be set
in channel grid 8 MHz.
Output frequency can be set in submenu in 125 kHz
steps (TV-AM) or 166 kHz steps (DVB-T).

Block diagram

Internet : http://www.kathrein.de
KATHREIN-Werke KG · Anton-Kathrein-Str. 1–3 · P. O. Box 10 04 44 · 83004 Rosenheim / Germany · Tel. +49(0)80 31/ 18 4 0 · Fax +49(0)80 31/ 184 306
Input Ch43
Output Ch22
Level 0.0 dB
TV-AM channel grid 8 MHz
Level
Lowering of the maximum output level
(see technical data) between 0 and –15 dB
possible in 0.5 dB steps.
RF
Output level "On" or "Off"
Operation mode
TV-AM : Frequencies correspond to video carrier
DVB-T: Frequencies correspond to channel
centre
647.250 MHz
479.250 MHz
HF On