Safety Information; Locking; Installation - Tuthill FILL-RITE FR102PHU Manual Del Usaurio

Safety Information

WARNING! To ensure safe and proper operation of your equipment, it is critical to read
and adhere to all of the following safety warnings and precautions. Improper installation or
use of this product can cause serious bodily injury or death!
1) NEVER smoke near the dispenser, or use the dispenser near open flames when
dispensing a flammable liquid! Fire can result!
2) A Fill-Rite filter should be used on the dispenser outlet to insure no foreign material is
transferred to the fuel tank.
3) Threaded pipe joints and connections should be sealed with the appropriate sealant or
sealant tape to minimize the possibility of leaks.
4) Storage tanks should be securely anchored to prevent shifting or tipping when full or
empty.
5) To minimize static electricity build up, use only static wire conductive hose when
dispensing flammable fluids, and keep the fill nozzle in contact with the container being
filled during the filling process.
6) DO NOT exceed 50 psi/ 3.5 BAR line pressure.
7) DO NOT install a foot valve or check valve without a pressure relief valve; cracking may
result.
WARNING! This product must not be used to transfer fluids into any type of aircraft.
WARNING! This product is not suited for use with fluids intended for human consumption
or fluids containing water.

Locking

Your Fill-Rite pump nozzle can be locked for added security.
With the pump turned off, and the nozzle in the stored position,
a lock can be inserted through the nozzle rest and the nozzle
handle opening. This configuration prevents the nozzle from
being removed and the pump being turned on.

Installation

An emergency shut-off valve with fusible link must be installed
at the dispenser inlet. All piping must be Schedule 40. Use
UL classified gasoline and oil resistant pipe compound on all
threaded joints. See page 14 and 15 for sample plumbing
diagrams.
IMPORTANT! Remote dispensers and tank top pumps must be installed in accordance with
local, state, and national electrical code NEC/ANSI/NFPA 70, NFPA 30, NFPA 30A, and
NFPA 395.
3