Tabla de contenido
Idiomas disponibles
Idiomas disponibles
AUDIO: Select ENABLE to record sound in addition to video (will have audio output in playback mode).
Select DISABLE, to turn sound recording off (no audio output in playback mode). Note: Audio cameras or a
microphone is required to record the sound
REC MODE: Sets DVR to record on Manual, Motion Detection, and Time Schedule Recording (detailed
instructions below).
PACK TIME: Choose the time length of all recorded files: 15, 30, 45, 60 min. (Max = 60 min)
MANUAL RECORDING:
From the Record Setup screen set the Rec Mode to "ALWAYS". Your DVR will continuously record and separate
files will be created with the Pack Time intervals you selected.
TIME SCHEDULE RECORDING:
From the Record Setup screen, set the Rec Mode to "TIME SCHEDULE RECORD" and click "SCHEDULE" in
green. This will display the Schedule menu (see below image). Select the channels (cameras) that you wish to
record on a schedule. The options are: All, CH-1, CH-2, CH-3, and CH-4 respectively. The channel you select
will be highlighted in "Blue", and the unselected channels will be "Grey. Click on the green GENERAL option
box then click on the boxes for the days and times that you want to record using this option on the timeline.
You can use the [From – To] pull-down menus and COPY button to copy settings from one day to another
day, or all days. Your DVR will record on it's Time Schedule, and separate files with the Pack Time Interval
you selected. Click APPLY to activate your customized schedule, and then reboot the DVR.
You can also click on the DEFAULT button to use the system defaults. The system default settings are:
Hr 01:00 am-07:59 am : No recording
Hr 08:00 am-18:59 pm : General recording (Time Schedule)
Hr 19:00 pm- 00:59 am : Alarm recording (Motion Detection)
MOTION DETECTION RECORDING:
From the Record Setup screen, set the Rec Mode to "TIME SCHEDULE RECORD" and click "SCHEDULE" in
green. This will display the Schedule menu (See "SCHEDULE" picture on previous page). The options are: All,
CH-1, CH-2, CH-3, and CH-4 respectively. The channel you select will be highlighted in "Blue", and the
unselected channels will be "Grey. Click on the red ALARM option box then click on the boxes for the days and
times that you want to record using this option on the timeline. You can use the [From – To] pull-down menus
Q-SEE QUICK SETUP GUIDE
M
O
D
E
L
N
U
M
B
E
R
Q
R
4
M
O
D
E
L
N
U
M
B
E
R
Q
R
4
Grid Explanation:
Red = Alarm (motion detection) recording
Green = General (time schedule) recording
Transparent = No recording
Blue = The channel and date selected.
5 | P a g e
.
0
7
4
-
4
1
8
0
7
4
-
4
1
8
Tabla de contenido
