BASIC SHREDDING OPERATION
Continuous operation:
7-minute maximum
NOTE: Shredder runs briefly after each pass
to clear entry.
Continuous operation beyond 7-minutes will
trigger 15-minute cool down period.
unlock, slide black button up. For greater safety, always unplug shredder after use.
PRODUCT MAINTENANCE
OILING SHREDDER
performance. If not oiled, a machine may
experience diminished sheet capacity, intrusive
noise when shredding and could ultimately
recommend you oil your shredder each time
you empty your waste bin.
TROUBLESHOOTING
PAPER JAM
1
2
Set to Reverse (
)
Alternate slowly back and forth
for 2-3 seconds
illuminated and the shredder will
recovery time for this shredder.
Remove Paper: When illuminated, press reverse (
LIMITED PRODUCT WARRANTY
defects in material and workmanship and provides service and support for 1 year from the date of
purchase by the original consumer. Fellowes warrants the cutting blades of the machine to be free
from defects in material and workmanship for 5 years from the date of purchase by the original
consumer. If any part is found to be defective during the warranty period, your sole and exclusive
warranty does not apply in cases of abuse, mishandling, failure to comply with product usage
standards, shredder operation using an improper power supply (other than listed on the label), or
unauthorized repair. Fellowes reserves the right to charge the consumers for any additional costs
PAPER/CARD
1
2
Plug in and turn
S
(I)
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
2
1
( )
*Apply oil across entry
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
3
4
)
and unplug
3
Feed paper/card
(
)
straight into paper
entry and release
) position, then slide black button down.
3
Set to Reverse (
)
for 2-3 seconds
5
6
Gently pull uncut
(
paper from paper
and resume shredding
entry. Plug in
incurred by Fellowes to provide parts or services outside of the country where the shredder is initially
service under this warranty, please contact us or your dealer.
4
When finished shredding,
( )
)
3