Tabla de contenido
Idiomas disponibles
Idiomas disponibles
HOW TO USE THE X2 pAD
More cooking programs can be stored under the number keys by using the X2 function.
In waiting mode, press X2, any of the number keys, and the Start pad,
you can recall a preset cooking program as follows:
Number/Memory Pads
Preset Cooking Time
X2 function can only program one stage cooking. After setting is finished, press Stop/Reset to return to waiting mode.
The oven will start after you touching X2, any of the number keys and then the Start pad. For example, to use the X2
function, and save a program of full power and 3 minutes cooking to number pad 8.
1. Open the door and place food in the oven, close it.
2. Touch PROG once.
3. Touch X2 pad once.
4. Press number pad 8.
5. Press Power Level once.
6. Touch number pads 3, 0, 0.
7. Press PROG to save.
NOTE:
When the program has been saved, you can press START to start cooking or you can also
press Stop/Reset pad to cancel.
If you want the oven to start immediately after you touching any of the number keys instead of after you touching the
Start pad, press and hold down Stop/Reset for 5 sec until "P L" appears on display; now you don't need to press Start
pad after selecting a cooking program by touching any of the number keys.
If you want to cancel the auto-number start setting, you can press and hold down Stop/Reset
for 5 sec until "P PROG" appears on display.
COUNT OF OpERATIONS
You can read the count of how many times the oven has been used. To do this,
1. In waiting mode, press and hold down Stop/Reset.
2. Touch Power Level pad. The number on display shows how many times the oven has been used.
This function is for the user to analyze the usage of the oven and the traffic flow at a particular location where the
oven is being used commercially.
SWITCH
The oven can use single tube or double tubes to cook. For single tube mode, you can save power, while for double
tubes, you can use less time to cook. The default setting for the oven is double tubes, however, you can press Switch
to change. Select it before setting a cooking program.
ADJUST THE COOKING TIME
During cooking, you can press +/- to adjust the cooking time. Each press to adjust 20 seconds. The maximum time
you can set is 1H :99 seconds. For the preset program, you cannot adjust the cooking time by pressing +/-
CHILD pROOFLOCK
In waiting mode, press and hold PROG for 5 seconds. The oven is locked.
To release child lock, press and hold PROG for 5 seconds, the oven goes to normal.
RETURN TO FACTORy SETTING
If you want the oven return to the default factory setting, you can press Start pad and plug in the oven until "00:00"
shows on the screen, then press the following pads one by one:
"1", "2", "3", "4", "5", "6", "7", "8", "9", "0", "Power Level", "X2", "PROG", "Switch", "+", "–", "stop/Reset", "Start".
And the screen will show "00:18", open and close the door, then open it again.
Beep will be heart to signal to oven is back to factory setting.
1
2
3
4
:20
:40
1:00
1:30
- 22 -
5
6
7
8
2:00
3:00
4:00
5:00
9
0
6:00
7:00
Capítulos
Tabla de contenido
