Kenmore 116.10065 Manual De Uso Y Cuidado página 16

EMPTYING DUST CUP
TO EMPTY DUST CUP TO REMOVE DUST CUP
I. Turn off and unplug vacuum cleaner.
'2. Lift dust cup handle located at the top
of the dust cup.
Handle
Cup
3. Pull the handle up and lift dust cup up
and out of the vacuum cleaner.
4. Remove any clogs that might be
located in the suction port or filter port
area.
Port
;uction
Port
1. Rotate dust
cup handle to
the vertical
position.
2. Hold dust cup
over a trash
container.
__Dust Cup
Latch
Dust Cup
Handle
Cup
3. Press the dust
cup latch slightly
outwards and
downward to
release the door.
The door witl swing open and the debris
will fall into the trash container.
4. Shake the dust cup to release any
debris that might hang in the pre-filter.
5. After the dust cup
is empty of debris,
firmly close the door.
Make sure you hear
a "click" sound to
indicate that the AIb
door is fully latched.
TO REPLACE DUST CUP
1. Place dust cup
back into vacuum
cleaner by inserting
the bottom first and
tilting back with the
dust cup handle
raised.
2. Lower the dust
cup handle to
lock dust cup in
place.
A noticeable
"click" should be
heard.
- 16 -