Remote Control Installation; First Operation - Blaupunkt CDC-FM 08 Instucciones De Manejo Y De Conexion

Remote control installation

The remote control does not necessarily
have to be firmly attached to the passenger
compartment of the vehicle. For example,
you may fix it using a self-adhesive hook-
and-loop fabric fastener as illustrated in fi-
gure 1.
• Find a suited mounting location for the
remote control unit. It should be conve-
niently accessible from the driver seat.
• Attach it so that it cannot slip.
• Route the remote control cable to the
modulator.
• Connect the 6-pole cable connector
with the modulator.
• Re-connect the battery terminal after
having completed all installation and
connection work.
16
Fig. 1
Possible installation of the remote control using
self-adhesive hook-and-loop fabric fastener
tape.

First operation

Re-establish all electrical connections after
having completed all installation and connec-
tion work.
• Press to switch on the CDC-FM 08.
Now use a pencil or ball pen to press
the reset button on the back of the re-
mote control.
Note: Press the reset button briefly when-
ever a malfunction occurs.
• Tune your car radio into the frequency
selected before on the modulator. To
adjust the frequency, follow the opera-
ting instructions of the radio equip-
ment.
Note: If you would like to adjust the frequen-
cy by seek tuning, start CD playback first
(see "Starting CD playback").
• We recommend to store the selected
frequency on one of the preset buttons.
For this, please read the information in
your car radio user manual.