Klip Xtreme Zaffire Manual Del Usuario página 3

Back panel
2
6 7
Connector
Picks up the signal for the tuner
1. Antenna
Provides the connection of sources equipped with digital
2. Optical audio port audio ports
These RCA jacks allow the connection of audio devices
3. AUX input
fitted with RCA and 3.5mm inputs when using the
adapter
Provide the connection of additional audio sources with
4. RCA inputs
true 5.1 surround sound capability
(cables not included)
Connect satellites and the soundbar in this terminal block
5. Speaker output connectors
6. Main power switch Turns the speaker on and off
Insert the power cord plug in an AC outlet
7. AC power cord
1
3
4
5
Descrption
Remote control
In addition to the top panel keys, an infrared remote control is included which provides
additional functions to allow greater control over the media player.
1. Install the supplied batteries in the remote control following the correct polarity as indicated
inside the compartment.
2. In order for the remote to operate properly, ensure that it is pointed toward the front of
the speaker.
1
3
5
9
10
7
Buttons
Press this button to alternate between the standby and active
1. Power button
modes on the device
Silences the audio coming from the speaker. Press it again to
2. Mute button
unmute the speaker
3. Source button
It replicates the function of the source button on the main unit
This button switches the decoder between 2.1 and 5.1 audio
4. Pro Logic
channels
Selects the front, rear or center speaker to adjust its output level
5. Select button
individually using the volume keys
Briefly press this button to cycle through the six different lighting
6. LED button
patterns, and also to disable this feature
Press these buttons to decrease or increase the frequency in
7. TUNE - / TUNE +
steps of 0.1MHz
Press and hold to scan downwards or upwards, and tune the
next available channel automatically
8. VOL+ / VOL - Press these buttons to increase or decrease the output volume
of the speaker
In USB, SD or
9. Bluetooth
™
start and pause media
In tuner mode, press and hold this button to start the automatic
search and storage of channels found in the band with a strong
broadcast signal
In mode, press and hold this button for several
Bluetooth
®
seconds in order to put the speaker back into pairing mode
In USB, SD or
10. /
™ Bluetooth
the previous or next track on your play list
In tuner mode, it will scan downwards or upwards to the next
memorized channel
11. Numbered keypad Press any key from 0 to 9 on the remote to choose directly the
tracks or channels you want to play It works in FM and USB
modes
2
11
4
6
8
Description
mode, briefly press this button to
®
, press any of these buttons to select
®