Before Installing; Required Clearances/Specifi Cations; Cooler Assembly - MasterCool MCP44 Manual De Instalación Y Funcionamiento

BEFORE INSTALLING

WARNING: Do not connect electrical power to the unit
until the installation is completed.
The MasterCool MCP Series cooler can be installed in a
sash-style or a slider-style window.
Alternatively, this unit is approved for in-wall installations.
REQUIRED CLEARANCES/ SPECIFICATIONS:
In all installations, the following clearances are required:
• Width: 22"
• Height: 22" PLUS: 4" additional space required above
exterior of cabinet for maintenance.
• Weight: 93 lbs operating weight.
Tools & Materials Required:
• Drill (power or cordless)
• Assorted drill bits (for drilling pilot holes for mounting
hardware)
• Adjustable Wrench
• Phillips Head Screwdriver
• Silicone or all-weather caulk for sealing closeout panels
to window frame
• Bubble level ( 3 foot level is preferred)
• Spacer material (as required)
Water connection Option 1
• Standard water hose
Water connection Option 2
• Sill-cock valve
• Length of ¼" copper or plastic tubing

Cooler Assembly

1. Remove unit from box. Verify that all parts are included.
2. Remove all packing materials, as shown below.
(Not supplied)
Parts
CALL 1-800-643-8341 IF YOU FIND PARTS
MISSING OR HAVE ANY QUESTIONS.If If
CALL 1-800-643-8341 IF YOU FIND PARTS
MISSING OR HAVE ANY QUESTIONS.
4