Tabla de contenido
TRUE
refrigerador / congelador flm
INSTALLATION OF CASTORS OR
OPTIONAL LEGS
Important Safeguard for installation of leg/castor. Images 1-5 demon-
strate procedure.
SECURING CASTORS AND LEGS
To obtain maximum strength and stability of the unit, it is important
that you make sure each castor is secure. Optional legs are hand-
tightened securely against the lower rail assembly see image 4-5. The
bearing race on the castor or the top edge of the leg must make firm
contact with the rail.
LEVELING SHIMS
Four leveling shims have been provided for leveling castored units
positioned on uneven floors. Shims must be positioned between rail
end and bearing race.
A. Turn the bearing race counter-clockwise until the cabinet is
level. Level front to back and side to side. (diagonally)
B.
Install the desired number of shims, making sure the slot of the
shim is in contact with the threaded stem of the castor. See
image 2.
1
Atornille la rueda en la
Para nivelar inserte la cuña
parte inferior de la base del
entre la base del gabinete y la
gabinete.
de la rueda.
2
3
Use la herramienta que se
suministra para apretar las
ruedas.
C. If more than one shim is used, turn the slot at a 90° angle so
they are not in line.
D. Turn the bearing race clockwise to tighten and secure the
castor by tightening the anchoring bolt with a 3/4 inch open-
end wrench or the tool provided. See image 3.
CAUTION: TO AVOID DAMAGE TO LOWER RAIL
ASSEMBLY, SLOWLY RAISE UNIT TO UPRIGHT
POSITION.
NOTE: OPEN HOLES LOCATED ON THE CROSS
MEMBERS OF THE FRAME RAIL SHOULD BE
PLUGGED BEFORE UNIT IS IN USE.
Base
Inferior
Extremo
del riel
Ajuste aquí
Cuña de
Nivelación
Pata
4
Atornille la pata en la parte
inferior de la base del
gabinete.
.
www
truemfg
Base Inferior
Extremo del riel
Rueda
5
El extremo de las patas
es ajustable, para una fácil
nivelación.
.
com
Ajuste aquí
Base del
Rodamiento
6
Tabla de contenido
