Tabla de contenido
Idiomas disponibles
Idiomas disponibles
...
2
Holding the trim kit frame in place, use a 7/64" drill bit to drill
.
four pilot holes into the front facing of the cutout/cabinet
through the mounting hole guides in the upper and lower
corners of the trim kit frame.
NOTES:
The holes will be drilled downward from the top, and
upward from the bottom at an angle of about 45°.
To avoid damage to the trim kit frame, do not overtighten
screws.
A
B
A. Trim kit frame
B. Mounting hole guide
D. Cutout ceiling
C
D
C. Long wood screw (4 - painted)
3
Secure trim kit frame to cutout/ cabinet by installing four long
.
wood screws (painted) into the pilot holes drilles in Step 2 above.
Installation is now complete. Replace any loose items that have
been removed from microwave oven cavity.
Save these installation instructions for future reference.
EN-6
Tabla de contenido
