Accessing The Web Configurator - Zyxel NBG460N Manual Del Usuario

The LEDs
Look at the LEDs (lights). When you connect the power, the power LED (
stays on once the device is ready.
The LAN (
are properly made.
If an LED does not turn on, check your connections. If this doesn't help,
disconnect the NBG460N from its power source, wait for a few seconds and
turn it back on.

2 Accessing the Web Configurator

Default Login Information
IP address
administrator password
1 Launch an Internet browser such as Internet Explorer. Enter "http://192.168.1.1" as
shown below.
ENGLISH
) and WAN ( ) LEDs turn on if the corresponding connections
http://192.168.1.1
1234
4
) blinks and