Home Screen - Shure LEGENDARY PERFORMANCE AXIENT AXT900 Manual Del Usaurio

Inserting Batteries into the Charging Bay
Slide the battery into the charging bay until it locks into place. The charge LED illuminates and the charge cycle begins.

Home Screen

When powered on, the charger displays the home screen. Icons indicate the charge
level of each battery, and the display alternates to show approximate hours and
minutes remaining until the battery is fully charged.
The numbers on the screen correspond to the charging bays 1 through 8 from left
to right.
1
2
3
4
Monitoring Menu
Use the monitoring menu to access detailed information about each battery.
1. From the home screen, use the arrow keys to highlight the number of the battery you want to monitor.
The white LED next to the selected battery illuminates.
2. Press the SET key to access the monitoring menu.
3. Use the arrow keys to scroll through the menu screens.
Press SET key at any time to return to the home screen.
Time to Full
Displays the time remaining until the battery is fully charged.
IMPORTANT: Battery might not be charged to full capacity if any of the following
status indicators appear:
Cold
Charging stopped because battery temperature is too cold. Charging will
resume when battery temperature increases.
Warm
Battery charging to less than full capacity (not less than 75%) because of
elevated temperature. The amber LED will illuminate when charging has
stopped.
Hot
Charging stopped because battery temperature is too hot.
Battery Health
This displays the health of a selected battery as a percentage of the charge capacity
of a new battery. Charge capacity (battery life when fully charged) will decline as a
result of repeated charge cycles, age, or storage conditions.
Cycle Count
Displays the total number of times that the battery has undergone one full count of
discharge and charge. Recharging after discharging half way counts as one half of
a cycle. Recharging after discharging a quarter of the way counts as one quarter of
a cycle.
5
▲
6
SET
7
8
The following messages may be display next to the bay number to indicate battery
status:
CALC calculating time to full
COLD battery cold
WARM battery warm
HOT battery hot
Recovery recovery mode active
error - press SET key for info
Error
Charge Status
Displays charge as a percentage of the total battery capacity. Also displays charge
in milliampere-hours (mAh).
Batt. Temp. (Battery Temperature)
Displays both the battery temperature (in Celsius and Fahrenheit) and the status, as
follows:
[Normal]
Battery temperature = 0°C to 45°C (32°F to 113°F).
[Cold]
Battery temperature = 0°C (32°F) or lower.
[Warm]
Battery temperature = 45°C to 60°C (113°F to 140°F) .
[Hot]
Battery temperature = 60°C (140°F) or higher.
Note: If warm or hot, try setting the fan to Always On or increasing ventilation to the
rack.
Network Status
Active
Indicates connectivity with other devices on the network.
Inactive
No connectivity with other devices on the network.
Note: IP address must be valid to enable networked control.
3