Installation; General - Hatco GLOMAX GMFFL Manual De Instalación Y Funcionamiento

INSTALLATION

General

Use the following procedure to install a Hatco GLOMAX
Portable Foodwarmer. Care should be taken when unpacking
shipping carton to avoid damage to unit and the components
enclosed.
WARNING
ELECTRIC ShOCk hAzARD: Unit is not weatherproof.
Locate unit indoors where ambient air temperature is a
minimum of 21°C (70°F).
FIRE hAzARD: Locate unit a minimum of 51 mm (2") from
combustible walls and materials. If safe distances are not
maintained, discoloration or combustion could occur.
Locate unit at the proper counter height in an area that is
convenient for use. The location should be level to prevent
the unit or its contents from falling accidentally and strong
enough to support the weight of the unit and contents.
Do not move or relocate unit when it contains food
product. Turn off unit, remove food product, and allow to
cool completely before moving or cleaning.
1. Remove the unit from the carton.
2. Remove the information packet.
3. Remove tape and protective packaging from all surfaces of
the unit and any accessories.
4. Attach the leg brackets to the top housing.
• Position the top housing, element side up, on a non-
scratch surface.
• Using the four screws provided, attach both leg brackets
to the top housing.
Leg Bracket
Top Housing
Figure 5. Assembly of Top Housing and Leg Brackets
CAUTION
Phillips Screw
5. Secure the top housing to the base unit using the screws
provided.
®
Base Unit
Figure 6. Assembly of Top Housing to Base Unit
6. Place the unit in the desired location.
• Locate the unit in an area where the ambient air
temperature is constant and a minimum of 21°C
(70° F). Avoid areas that may be subject to active air
movements or currents (i.e., near exhaust fans/hoods
and air conditioning ducts).
• Make sure the unit is at the proper counter height in an
area convenient for use.
• Make sure the countertop is level and strong enough to
support the weight of the unit and food product.
• Make sure all the feet on the bottom of the unit are
positioned securely on the countertop.
7. Install any options or accessories that came with the unit.
Refer to the OPTIONS AND ACCESSORIES section for
details.
6
Top Housing
Phillips Screw
Form No. GMFFLCEM-0810