dirna Bergstrom bycool green line DINAMIC 1.1 Manual De Instrucciones página 11

DINAMIC 1.1
• Connect or replace the power supply cable fuse.
• Check and correct any possible poor contacts, breakages or disconnection of the power
supply cable to the battery.
• Connect communications cable (wire clamps of 3 cables located in the control panel, control
module or in the connection with the evaporator).
• Connect the power supply wire clamp of the control module (in the case next to the
compressor).
• Replace the cut-out (2A) (found inside the case of the control module, next to the
compressor).
(If the error persists, contact an Authorised Technician).
• Check and correct possible poor contacts in terminals or cables of the recirculation
sensor.
• Connect or replace the recirculation sensor.
(If the error persists, contact an Authorised Technician).
• Check and correct any possible poor contacts in connections or terminals of the battery
supply cable.
• Charge or replace the battery.
(If the error persists, contact an Authorised Technician).
Solution
11
Air conditioning for vehicles
EN