Before You Begin; Tools Required; Torque Specifications - Warn ProVantage 79958 Instrucciones De Instalación

Before You Begin

This kit also requires a ProVantage Plow Base Kit, a vehicle specific Plow Mounting kit, and a WARN winch to
raise and lower the plow. Please contact your nearest dealer for part numbers. Please note that much of the
hardware used for this installation can be found in the Plow Base kit. A list of replacement parts may be found
on the last page of this document.
Table of Contents
I.

Tools Required ...................................................2

II. Torque Specifications .........................................2
III. Parts List ............................................................3
IV. Installation ..........................................................3
V. Maintenance/Care ..............................................5
I. Tools Required
• Ratchet
• Sockets: 15mm
II. Torque Specifications
Please use the recommended torque specifications
when assembling this product unless otherwise speci-
fied in the instructions.
M10 diameter bolt and nuts: 17 N-m (12 ft-lbs)
WARN® INDUSTRIES PAGE 2 79959 Rev A1