Color Locking - Duratech Spectra VISION DVS050 Serie Manual De Instrucciones

Color Locking (only for TW lamps)
If desired, TW lamps can be "locked" on a color program of choice. This means the lamp
will only light up in that specific color, and it is no longer possible to change the color
program of the lamp.
This process can be reversed anytime by "unlocking" the color program. All color programs
will then be available again, and can be changed at any time.
Locking/Unlocking procedure
Locking the color of a lamp starts with a synchronisation procedure:
1. Switch ON the 12 VAC line voltage
2. Switch OFF the 12 VAC line voltage and wait for at least 20 sec
3. Switch ON and switch OFF
4. Switch ON and switch OFF
5. Switch ON
6. Wait for about 15 seconds. The lamp(s) will now flicker
LOCKING: - during the flickering of the lamp, select the desired color program by
switching (within 5 seconds) the lamps OFF and ON quickly.
- When the right color is selected, then wait 5 seconds, until
the flickering stops
- The lamp is now locked on the chosen color program
UNLOCKING: - When the lamps flicker, then do nothing for 5 seconds.
- The flickering will stop, and it is again possible to change the color
(max 3 sec ON and max 3 sec OFF)
(max 3 sec ON and max 3 sec OFF)
program of the lamps.
(max 60 sec)
17