XPG Summoner Guia De Inicio Rapido página 3

How to record a Macro combination
Macros are designated sequence of key presses which are consistently executed in the exact same timing as they were recorded.
Each Macro can be assigned to any given key of your choice within a specific profile layout.
1. Press FN + F1-F5 to Select a target profile.
Each profile enables its own specific keyboard
layout that you intend to modify.
2. Press FN + right ALT key to start recording
The Gaming mode indicator (
blinking once every second to show that the
device is in listening mode.
3. Record your macro sequence
Type the macro you wish to record.
The timing of your macro will be executed exactly as recorded, starting from the first key press.
The length of your macro is limited to a maximum of 40 key presses or 20 seconds max.
4. Press FN + right ALT key to end recording.
The Gaming indicator ( )will blink rapidly
(twice per second), waiting for your input.
5. Assign a Key : Press the desired target key that you want to associate your recorded Macro sequence to.
Please note that If no action is recorded in 20 seconds, the recording will end automatically and your recorded macro will be lost.
To erase a single macro, simply select the profile where the macro key is saved and record the key's original value.
Please note that "Win" and "FN" keys cannot be assigned nor used in Macro sequences
Reset your keyboard:
Press FN+ESC will remove all profiles settings, including macro keys and lighting effects.
Windows lock:
Your windows key will be disabled by default when Gaming mode is on, including when selecting any profile.
LED Lighting mode
Press FN + UP/DOWN arrow key to adjust the lighting brightness
There are 5 lighting selections in the following sequence:
OFF / 25% / 50% / 75% / 100%
Press FN + LEFT/RIGHT arrow key to choose a lighting effect
There are 7 predefined Lighting effects in the following sequence:
Static / Breathing / Trigger / Explosion / Color Cycle / Color Wave /
WASD mode
Press FN + F1-F5 to choose a static color
Default static color is red.
Static colors are assigned by default to each profile as follows:
+
Blue
+
Green
Anti-Ghosting
By default your XPG Summoner is setup to use full Keyboard "N-Key Rollover", which means it can correctly register without error any
combination being pressed simultaneously.
The following combination of keys will change anti-ghosting keys setting:
Press FN + INS – 6 Key Rollover
(Legacy mode, needed for older versions
of Windows and other operating systems)
+
+
) will start
+
+
Indigo
+
Yellow
+
+
+
+
Press FN + DEL – Full Keyboard N-Key Rollover
+
White
+