Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Cleaning
•
Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly,
and shorten the machine's service life. Clean the body of your machine with a soft brush,
or dry cloth. If available, use clean, dry, compressed air to blow through the ventilation
holes
•
Clean the tool casing with a soft damp cloth using a mild detergent. Do not use alcohol,
petrol or strong cleaning agents
•
Never use caustic agents to clean plastic parts
•
Use water, a suitable cleaning solution, or mild solvent to clean rests of material off the
accessory. Wear appropriate protection equipment whilst cleaning, including eye, hand
and breathing protection
GB
Note: Dispose of rest material and contaminated cleaning solution according to regulations.
Recycle where possible. Only use non-water solvents where absolutely necessary and
always follow the manufacturer's guidelines for safe usage.
Lubrication
•
Slightly lubricate all moving parts at regular intervals with a suitable spray lubricant
Brushes
•
Over time the carbon brushes inside the motor may become worn
•
Excessively worn brushes may cause loss of power, intermittent failure, or visible
sparking
•
To replace the brushes, remove the Brush Access Plugs (8) from both sides of the
machine. Remove the worn brushes and replaced with new. Replace Brush Access
Plugs. Alternatively, have the machine serviced at an authorised GMC service centre
Note: One set of Spare Brushes is supplied with this tool.
Storage
•
Store this tool carefully in a secure, dry place out of the reach of children
•
ALWAYS remove all material from the accessory, clean and dry the tool before storage
Disposal
Always adhere to national regulations when disposing of power tools that are no longer
functional and are not viable for repair.
•
Do not dispose of power tools, or other waste electrical and electronic equipment
(WEEE), with household waste
•
Contact your local waste disposal authority for information on the correct way to dispose
of power tools
8
Tabla de contenido
Solución de problemas
