Hone I Nstallation; Connecting The Ac (Electrical) Power; Charger Unit; Wall Base Unit - RCA 25110 Guia Del Usuario

Connections & Setup
Phone Installation

Connecting the AC (Electrical) Power

Charger unit

Plug the AC power adaptor into an electrical outlet and the DC connector into the
bottom of the charger.
CAUTION: Only use the 5-2678 power adaptor that came with this unit. Using other
power adaptors may damage the charger unit.

Wall base unit

To install your wall base unit, locate an electrical outlet with a phone jack nearby.
1. Plug the wall base unit into an electrical outlet.
2. Make sure that the pins are inserted fully and firmly into the outlet. If not,
choose another electrical outlet.

Connecting the Telephone Line

There are two jacks on the bottom of the wall base unit.
Plug one end of the telephone line cord into the LINE jack on the bottom of the
wall base unit and the other end into a modular jack.
The PHONE jack may be used to connect a parallel phone by connecting a second
telephone line cord from the PHONE jack on the bottom of the wall base unit to the
parallel phone.
10