Automatic Search - GBS Jolly line Universal Air Plus Instrucciones

1. Remote control preparation
- Slide the rear cover o the battery casing.
- Insert 2 batteries (AAA type) taking care to respect the polarity
indicated.
2. Remote control programming
2.1 Find Brand
- Find the code(s) corresponding to the brand in the code table (e.g.:
if you nd 0188-0196 all codes from 0188 to 0196 are included).
- Insert the code(s) found by direct input
2.1.1 Direct input
- Press the
- Press the 4 keys corresponding to the 4 gures in the code desired.-
Check that the remote functions correctly, if the device does not
respond correctly, insert the next code for that brand (2.1.1)
If the device does not function correctly with any of the codes, e ect
an Automatic search (2.2)
N.B.: Press the

2.2 Automatic search

- Pointing the remote control towards the conditioner, press the
key until the model code starts incrementing (circa 5 sec.)
- Release the
- When the conditioner turns on press any key to stop the search.
- Check that the remote control functions correctly, if the device
does not respond correctly, proceed with the Automatic search (2.2)
3. Clock setting
- Press the
- Press the
- Press the
4. Programming the Timer ON or Timer OFF function
To work in TIMER mode the remote control must remain oriented
towards the conditioner at a suitable distance
4.1 Timer ON
- Press the
- Press the
desired.
- Wait some 5 seconds until the time stops ashing.
INSTRUCTIONS
key, the model code on the display ashes.

key to select the next code

key but continue pointing the remote control.
key, and the time on the display starts ashing.
and/or keys until the correct time is displayed.
key to con rm the time.
key, and the time on the display starts ashing.
and/or keys until you reach the switch on time
UK