Tripp-Lite SRCOOLNET Instalación Y Guía De Inicio Rápido página 4

Installation
3 - Static IP Address Assignment/Terminal Menu
Configuration Settings
Determine IP Information: Before assigning a static IP address, you'll need to
3-1
know the IP address, gateway address and subnet mask. If you do not have this
information, contact your network administrator for assistance.
Configure Terminal Emulation Program: Open a VT100-compatible terminal
3-2
emulation program (such as the HyperTerminal program bundled with Microsoft
®
Windows ) on a computer with an available DB9
serial port. A notebook computer may be the
most convenient choice. Set the terminal
emulation program to use the COM port
corresponds to the DB9 serial port. Specify the
parameters 2
SRCOOLNET terminal interface:
If the terminal emulation program supports multiple emulation modes, you may
also need to specify VT100 emulation
1
13-08-187 93-32CA.indb 4
required to communicate with the
Bits per second:
Data bits:
1 that
Parity:
Stop bits:
Flow control:
3 .
2
4
®
9600
8
None
1
None
3
9/27/2013 9:25:20 AM